The cantilever rack main structure for industrial pipe shelf
-
It is mainly composed of upright columns, cantilever beams, bases, vertical tie rods and other components, and the overhanging components directly carry the goods shelves.
-
The shelf should be composed of uprights (or uprights), bases, cantilever beams, vertical tie rods and other components;
-
The shelf structure should be made of cold-formed thin-walled steel/section steel. The connection of each structural part should be easy to disassemble;
-
The layer spacing of the shelf cantilever beam should be adjusted according to the height of the unit cargo;
-
The front end of the cantilever beam should be upturned by 2-4°. When fully loaded, the front end of the cantilever beam should be higher than the root of the beam;
-
The cantilever beam should have safety protection devices to prevent the goods from falling and sliding;
-
Between the adjacent columns of the shelf, there should be vertical tie rods.
Before purchasing cantilever racks, these parameters need to be confirmed
-
The specific size requirements of the shelf (the size of the goods placed);
-
Cantilever type (single and double-sided) and arm length;
-
The number of layers and the effective height requirements of each layer;
-
Bearing capacity per arm (if it is loading per layer, you need to know the number of cantilevers per layer)
Introduction of Metal Shelves Cantilever Rack
-
Single-side arms/ Double-side arms
- Make full use of the anti-load capacity of the material, which has the characteristics of large load and low cost
- The warehouse utilization rate and work efficiency can be greatly improved.
- The column is prefabricated with double rows of holes, the pitch of the holes is 100/140mm, and the cantilever is connected to the column through a plate pin, which can be adjusted up and down
- The cantilever rack series are all combined, easy to disassemble, transport, adjust, move, etc., safe and reliable
-
Adjustable uprights are used to adjust the spacing between the partitions and increase or decrease the partitions according to actual needs
-
Dimensions are customized
Advantage of Adjustable Cantilever Arm Racking
-
Fully improve space utilization
-
Compatible with stacker or forklift
-
Flexible in order to any kind of item quantity, pounds or dimension
-
The length of the cantilever shelf can be freely combined according to the site conditions
Specifications of Double Side Warehouse Cantilever Rack
Double-side Cantilever Rack | 2-5 layers boards (steel board), level-hight can be adjustable freely |
Corrosion protection,easy to assemble and dismantle | |
Grade Q235 (or SS400) Q345 | |
Blue(RAL5017), Orange(RAL2004), Green(RAL6000), Light Grey (RAL7035), Yellow(RAL1037) | |
Adjustable Pitch:75mm,100mm, 3″, 4″ | |
Powder Coated or Galvanized | |
Application Environment:Normal Temperature or Freezer |
Cantilever Arm Racking | Max. 23000kg/bay capacity |
Q235 Steel/ Sizes are customized |